Honeywell FC100A1011 Media Filter
The Honeywell FC100A1011 Media Filter is an OEM whole-home media cabinet filter engineered with 19.81 x 19.75 x 4.38 in actual dimensions to provide deep-surface particulate capture with minimal system static pressure.
This product is covered independently under ClariSelect editorial standards. Commercial affiliate purchasing links remain inactive pending partner approval. Consult manufacturer specifications below.
3-Year True Cost of Ownership Model
Captures 65–79% of E2 allergens (1.0–3.0μm) with moderate fine smoke capture.
Deep pleat geometry delivers high surface area and minimal static pressure drop.
Thermal beverage board frame with wire backing to prevent media collapse under blower load.
Bulk multi-pack procurement typically reduces annual per-filter cost by 25% to 40%.
- Massive media surface area lasts 6-12 Months
- Ultra-low static pressure drop (0.14 in. w.g.)
- Self-sealing gasket prevents air bypass
- Official OEM fit and durability
- Requires professional 4-inch media cabinet installation
- Higher unit replacement cost than standard 1-inch filters
Verified Engineering Specifications
| Nominal Dimensions | 20x20x4 | Actual Dimensions | 19.81 x 19.75 x 4.38 in |
|---|---|---|---|
| Filter Depth | 4-inch | Media Construction | High-Capacity MicroFine Pleat |
| ASHRAE MERV Rating | MERV 11 | Proprietary Rating | | FPR 7 |
| Initial Resistance | 0.14 in. w.g. @ 400 FPM (Ultra-Low Resistance) | Airflow Capacity | |
| Replacement Filter Cost | $51.99 | Replacement Interval | Every 6-12 Months months |
| Annual Consumable Cost | 51.99 | Compatible Equipment | Honeywell F100, F200 20x20 Cabinets |
Our Take on the Honeywell FC100A1011 Media Filter
A premium whole-house filtration cartridge that maximizes blower motor efficiency while capturing allergens down to sub-micron sizes.
Filtration Performance Note
Tested under ASHRAE 52.2 protocols, achieving MERV 11 rating with 40+ square feet of expanded pleated media.
Installation, Airflow Direction & Maintenance Protocol
Turn off furnace power. Unlatch media door, slide out exhausted cartridge, and slide new cartridge along cabinet guide rails.
Common Questions About the Honeywell FC100A1011 Media Filter
How often does this media filter need replacement?
Under typical home use, this deep cartridge lasts 6-12 Months. Homes with pets or high dust should inspect at 6 months.
Can I use this filter in a standard 1-inch slot?
No. This 4-inch filter requires a dedicated whole-home media cabinet installed adjacent to your furnace or air handler.
Is this an authentic OEM replacement?
Yes, this matches official Honeywell Home engineering specifications with factory self-sealing technology.
Direct Compatible Alternatives
Aprilaire 310 Clean Air Filter
When to choose: Direct 20x20x4 compatible fitment offering MERV 11 performance.
Aprilaire 313 Healthy Home Filter
When to choose: Direct 20x20x4 compatible fitment with MERV 13 filtration.